Warmup 10mm Insulation Board

Length: 1250mm
Width: 600mm
Thickness: 10mm
Area per board: 0.75m sq

WARMUP INSULATION BOARD is a water resistant insulated tile backer board made of extruded polystyrene, faced on both sides with a fibreglass mesh embedded into a thin cement polymer mortar.

WARMUP INSULATION BOARD can be used as a structural tile backer board in the floor. It will withstand a load of 30 tonnes per square metre. It is ideal for use with underfloor heating as it pushes the heat into the room, by not allowing heat to penetrate down into the concrete substrate below. As a wall tile backer board, tiles can be fixed directly on to the surface without prior preparation and, being totally waterproof, is ideal for use in bathrooms or showers.

WARMUP INSULATION BOARD will save you money when used in conjunction with undertile heating by acting as a very efficient thermal barrier. It reflects the heat upwards into the floor tile instead of allowing heat to warm up the concrete slab below. By using WARMUP INSULATION BOARD you will find that after switching on your heating, your floor tiles will warm up in about 10-15 minutes. Without WARMUP INSULATION BOARD it could take anything from 2-3 hours, or more.



MINIMUM ORDER - 6 BOARDS