Reina Fiore Radiators

Reina Fiore Radiators

The Reina Fiore is a flat radiator available in white Ral 9016 Textured or Ral 7016 anthracite Textured finish as well as a choice of sizes. The Reina Fiore has side cut-outs to produce a practical and stylish designer radiator. For use with central heating system only.

5 year guarantee.

Supplied with brackets, air and blanking vent.

Wall to front face 68 - 88mm.
Wall to Pipe Centres: 35 - 55mm

Delivered usually 1-2 working days

Model	Height (mm)	Width (mm)	Reina Output Btus 70 deg	Reina Output Watts 70 deg	UK Standard Output Btus 50 deg	UK Standard Output Watts 50 deg
RND-FE4180	1790	400	3826	1122	2470	724
RND-FE4917	1790	490	4862	1426	3139	921
RND-FE5917	1790	590	5851	1716	3777	1108

Confused by the difference between the Reina Outputs and the UK Standard Outputs indicated above? Heat outputs are shown in both Watts and BTUs (British Thermal Units). All outputs are based on the system’s likely operating temperature and is usually shown as Delta T 50 Degrees which is the current European and UK Rating. Historically, the UK rating was calculated at Delta T 60 Degrees. We generally display the output calculated at Delta T 50 Degrees. However, Reina calculate and illustrate their outputs based on Delta T 70 Degrees. The result of this is that their outputs appear artificially higher than other manufacturers. This could potentially result in our customers purchasing a radiator that does not achieve the heat output that is required. As a consequence, we display Reina's output (as featured in their brochure) at Delta T 70 as well as the UK Standard Output calculated at Delta T 50. If you are trying to achieve a certain output, it is most probable that you will need to refer to the UK Standard outputs on the table above but if you are unsure, please check with your installer.