Gledhill StainlessLite Plus Indirect Unvented Cylinders

SKU
ST LITE INDIRECT
Gledhill StainlessLite Plus Indirect Unvented Cylinders
Gledhill Stainless Lite Plus Indirect Unvented Cylinders.

An unvented cylinder for use with a conventional boiler and electric

Available in 8 sizes ranging from 90 litres to 400 litres, with the largest model capable of satisfying the hot water demands of a property with 3 bathrooms and 3 separate shower rooms.

The indirect range has a high efficiency corrugated tube coil which is connected to a conventional boiler to heat the cylinder of water. The coil’s corrugated design gives much faster recovery times than can be achieved with plain tube coils.

All models have a temperature and pressure relief valve which is factory set at 6 bar and 95 degrees celsius.

(Please note all indirect models come with an on-peak back-up immersion but only the 250, 300 and 400 litre models are supplied with an additional off-peak immersion.)

KEY FEATURES
• Designed for use with gas or oil boilers, either sealed system or open vented
• High efficiency corrugated coil maximises heat transfer to the cylinder of water
• Corrugated coil provides faster reheat times compared to plain coil
• 3kW incoloy immersion heater for emergency back-up
• 90° elbow, flexihose and drain valve supplied as standard

Gledhill Stainless Lite Plus Cylinders carry a transferable 25 year guarantee.
Full Features
Brand Gledhill
SKU ST LITE INDIRECT
Write Your Own Review
You're reviewing:Gledhill StainlessLite Plus Indirect Unvented Cylinders
Your Rating