Gledhill Stainless ES Direct Unvented Cylinders

Gledhill Stainless ES Direct Hot Water Cylinder

Features:

• Cylinder heated by immersion heater
• Delivers mains pressure hot water, enabling high flow rates for showers and baths without the need for a boost pump
• 40mm insulation to reduce heat loss
• Insulation thickness is 40mm
• Recycled materials used in construction
• Cylinder is supplied with plain pipe connections suitable for use with compression fittings
• 3 bar Pre-charged Expansion Vessel size: 12 Litres
• Pressure Regulator 3 bar inlet group c/w balance cold supply
• Expansion vessel connection and expansion valve set at 4.5 bar
• 37% energy efficiency
• Opening temperature of P & T Relief Valve 95 degree C
• Energy cut-out thermostat setting 82 degree C
• Annual consumption: 2755 kWh/annum
• Thermostat temperature setting 62 degree C
• Sound power level: 15db
• Manufactured in accordance with the requirements of BS EN 12897
• Supplied with full NSF WRC and WRAS independent approvals
• The unvented cylinder is manufactured from highly corrosion-resistant duplex stainless steel
• Supplied with 25 year guarantee from manufacturer