Home Up Catalogue Terms & Conditions Search View Basket Checkout Contact Us

Online Catalogue | Heating Controls, Thermostats and Valves | HEATMISER TEMPERATURE CONTROL SYSTEMS

HEATMISER TEMPERATURE CONTROL SYSTEMS

Heatmiser DS-SB Flush Mount with Set Back Function Thermostat

The Heatmiser Heatmiser DS-SB Set Back Thermostat is ideal for those wanting a simple but energy efficient control system. The DS-SB features a set back function, a function that will automatically reduce the set temperature by 4C when no time clock signal is detected*

The DS-SB thermostat has been designed to work in conjunction with the Heatmiser UH3 wiring centre and the Heatmiser TM4 Programmer, but could equally be used as a standalone dial thermostat.

Functions include;
•Slide switch mode select (Constant, Off, Time Clock)
•05-35C Temperature Range
•4C Set Back Function
•230v, 3A Switch Rating
•CE Approved
* 4 core cabling is required from time clock in order to use the set back function.

Price Excl VAT: £30.00 (£36.00 Including VAT at 20%)

Quantity:

Heatmiser PRT/HW Programmable Thermostat with Hot Water

The Heatmiser PRT/HW is our 230v 5/2 day programmable thermostat with an additional 5/2 day program for a domestic hot water cylinder. Reduced costs and wiring means the PRT/HW really is an all-in-one solution.

The following features are available;

- Large display
- Optimum Start
- ºC / ºF Selectable
- Automatic blue back-light (Turns off after 30 seconds)
- Flush mounting
- 30 minute timing increments
- 5/2 day Heating Program
- 5/2 day Hot water Program
- Up to 4 changes in room temperature
- Key Locking Facility
- Adjustable Frost Protection (7-12ºC)
- Easily increase or decrease the required temperature
- Remote control optional
- Supply: 230v
- Outputs: Volt free 3A Max
- Dimensions: 98mm x 85mm x 13mm (Height, Width, Depth)
(Please note 13mm depth is after installation)

White Finish - Also available in Brass and Silver finish - Please also order relevant enclosure from below if Brass or Silver effect is required.

Price Excl VAT: £44.00 (£52.80 Including VAT at 20%)

Quantity:

Heatmiser PRT Programmable Thermostat

The Heatmiser PRT is our 5/2 day programmable room thermostat. The PRT is a digital thermostat and programmer in one, providing up to 4 different temperatures at different times of the day. It includes Optimum Start which is an energy saving feature designed to reduce the amount of heat up time required depending on the conditions in the building. In addition, this thermostat includes a keypad lock - so you can finally stop the fiddling.

The following features are available;
- Large display
- Self Learning Optimum Start
- Automatic blue back-light (Turns off after 30 seconds)
- Flush mounting
- °C / °F Selectable
- 30 minute timing increments
- 5/2 day Heating Program
- Up to 4 changes in room temperature
- Key Locking Facility
- Frost protection with adjustable temperature setting.
- Easily increase or decrease the required temperature
- Remote control optional
- Supply: 230v / 110v Option
- Outputs: Volt free 3A Max

White Finish - Also available in Brass and Silver finish - Please also order relevant enclosure from below if Brass or Silver effect is required.

Price Excl VAT: £40.00 (£48.00 Including VAT at 20%)

Quantity:

Heatmiser PRT-ETS Touchscreen Programmable Floor Heating Thermostat

The Heatmiser PRT-ETS Electric Floor Heating Thermostat - Our 230v Touchscreen, programmable room thermostat for electric floor heating.

The following features are available;

- Blue back-lit Touchscreen
- Supplied with a 3 Meter Remote Floor Probe
- Heating: Weekday/Weekend or 7 Day Programming (Selectable in Software)
- Holiday Function
- Hold Function
- Automatic blue back-light (Turns off after 30 seconds)
- Flush mounting
- °C / °F Selectable
- Key Locking Facility
- Frost protection with adjustable temperature setting.
- Easily increase or decrease the required temperature
- Supply: 230v
- Outputs: Volt free 13A Max
- Dimensions: 110x100x17mm

White Finish - Also available in Brass and Silver finish - Please also order relevant enclosure from below if Brass or Silver effect is required.

Price Excl VAT: £64.00 (£76.80 Including VAT at 20%)

Quantity:

Heatmiser PRT-TS Touchscreen Programmable Thermostat

The Heatmiser PRT-TS is our 230v Touchscreen, programmable room thermostat, ideal for conventional or combi-boiler systems. This thermostat can be used to replace a mechanical thermostat.

The following features are available;

-Blue back-lit Touchscreen
-Weekday/Weekend or 7 Day Programming (Selectable in Software)
-Holiday Function
-Hold Function
-Automatic blue back-light (Turns off after 30 seconds)
-Flush mounting
-°C / °F Selectable
-Key Locking Facility
-Frost protection with adjustable temperature setting.
-Easily increase or decrease the required temperature
-Supply: 230v
-Outputs: Volt free 3A Max
-Dimensions: 110x100x17mm

White Finish - Also available in Brass and Silver finish - Please also order relevant enclosure from below if Brass or Silver effect is required.

Price Excl VAT: £51.00 (£61.20 Including VAT at 20%)

Quantity:

Heatmiser PRT-NTS 12v Network Touchscreen Programmable Thermostat

The Heatmiser PRT-NTS is our low voltage, programmable digital room thermostat, ideal for conventional or combi-boiler systems

The following features are available;
•5/2 Day or 7 Day Program Mode (User Selectable)
•Blue back-lit Touchscreen
•Automatic blue back-light (Turns off after 30 seconds)
•Flush mounting
•°C / °F Selectable
•Key Locking Facility
•Temperature Hold Function
•Holiday Feature
•Frost protection with adjustable temperature setting.
•Easily increase or decrease the required temperature
•Supply: 12v
•Outputs: Volt free 3A Max
•Dimensions: 110x100x17mm

White Finish - Also available in Brass and Silver finish - Please also order relevant enclosure from below if Brass or Silver effect is required.

Price Excl VAT: £53.00 (£63.60 Including VAT at 20%)

Quantity:

Heatmiser PRT-ENTS 12v Network Touchscreen Floor Heating Thermostat

The Heatmiser PRT-ENTS is a 12v Touchscreen, programmable room thermostat supplied with a remote sensor. This thermostat can be used to control air, floor or air and floor temperature and can also be used to control ensuites.

The following features are available;
•Blue back-lit Touchscreen
•Supplied with a 3 Meter Remote Floor Probe
•Heating: Weekday/Weekend or 7 Day Programming (Selectable in Software)
•Holiday Function
•Hold Function
•Automatic blue back-light (Turns off after 30 seconds)
•Flush mounting
•°C / °F Selectable
•Key Locking Facility
•Frost protection with adjustable temperature setting.
•Easily increase or decrease the required temperature
•Supply: 12v
•Output: 12v
•Dimensions: 110x100x17mm

White Finish - Also available in Brass and Silver finish - Please also order relevant enclosure from below if Brass or Silver effect is required.

Price Excl VAT: £57.00 (£68.40 Including VAT at 20%)

Quantity:

Heatmiser PRT2-NTS Two Zone 12v Network Touchscreen Prog Room Stat

The Heatmiser PRT2-NTS is our Two Zone 12v Touchscreen, programmable room thermostat, ideal for use in bedrooms with en-suite. Zone one uses the built in air sensor whilst zone two uses the remote sensor provided. The remote sensor probe can be placed inside our sensor housing.

The following features are available;
The following features are available;
•Blue back-lit Touchscreen
•Two Zone
•Compatible with our Network Products
•Weekday/Weekend or 7 Day Programming (Selectable in Software)
•Holiday Function
•Hold Function
•Automatic blue back-light (Turns off after 30 seconds)
•Flush mounting
•°C / °F Selectable
•Key Locking Facility
•Frost protection with adjustable temperature setting.
•Easily increase or decrease the required temperature
•Supply: 12V
•Outputs: Volt free 3A Max
•Remote Sensor Included
•Dimensions: 110x100x17mm

Price Excl VAT: £62.00 (£74.40 Including VAT at 20%)

Quantity:

Heatmiser PRTHW-WTS Wireless Prog Stat with Hot Water and Receiver

Heatmiser PRT/HW-WTS is a wireless Touchscreen Programmable Room Thermostat with an additional timed output for a Hot Water cylinder.
The Heatmiser PRTHW-WTS works with the Heatmiser RC1-WTS Wireless receiver. The receiver is hard wired to the boiler and hot water valve and the wireless thermostat can be desk or wall mounted with range of the receiver (up to 100 meters open space).

Features include:
•Wireless Thermostat - 433MHz
•Distance: Up to 100 Meters Open Space
•Large Back Lit Touchscreen Display
•5/2 or 7 Day Programming Modes (Heating)
•4 Heating Comfort Levels per Day
•5/2 or 7 Day Programming Modes (Hotwater)
•4 Hot Water Switching Times per Day
•Optimum Start
•ºC/F Option
•05ºC - 35ºC Range
•Holiday Function
•Hold Function
•Wall Mount or Desk Stand
•Rechargeable Battery (Approx 6 month between charges)
•Mini USB to USB cable provided to allow for recharging from PC
•Frost Protection
•Key Lock Facility
•Dimensions: 109mm x 99mm x 20mm (Height, Width, Depth)

PLEASE NOTE: THIS PRODUCT IS NOT COMPATABLE WITH THE BRASS OR SILVER ENCLOSURES

Price Excl VAT: £90.00 (£108.00 Including VAT at 20%)

Quantity:

Heatmiser PRTHW-TS 230v Touchscreen Prog Room Stat with Hot Water

The Heatmiser PRT/HW-TS is a 230v Touchscreen, programmable room thermostat with an additional output for a hot water cylinder.

The following features are available;
•Blue back-lit Touchscreen
•Heating: Weekday/Weekend or 7 Day Programming
•Hot Water: Weekday/Weekend or 7 Day Programming
•Holiday Function
•Hold Function
•Automatic blue back-light (Turns off after 30 seconds)
•Flush mounting
•°C / °F Selectable
•Key Locking Facility
•Frost protection with adjustable temperature setting.
•Easily increase or decrease the required temperature
•Supply: 110v / 230v
•Outputs: Volt free 3A Max
•Dimensions: 110x100x17mm

Price Excl VAT: £53.00 (£63.60 Including VAT at 20%)

Quantity:

Heatmiser PRT-WTS Wireless Prog Stat with RC1-WTS Receiver

The Heatmiser PRT-WTS is a programmable wireless thermostat with Touchscreen display, ideal for those looking to relocate their existing thermostat. The Heatmiser PRT-WTS works with the Heatmiser RC1-WTS Wireless receiver. The receiver is hard wired to the boiler, so this can be located next to the boiler or you could use the existing thermostat cabling. The wireless thermostat can then be desk or wall mounted with range of the receiver (up to 100 meters open space) enabling you to relocate your thermostat.

Working in the Office, Watching TV in the Living Room? The Touchscreen Wireless Thermostat series is supplied with a wall mounting plate however you are more likely to make use of the desk stand as it allows you to decide exactly where to place the thermostat. For those with a single thermostat in your home, you dont have the benefit of different heating zones. However, using this Heatmiser Wireless thermostat allows you to move the thermostat around your home, so for example in the office during the day and living room during the evening.

Features include:
•Wireless Thermostat - 433MHz
•Distance: Up to 100 Meters Open Space
•Large Back Lit Touchscreen Display
•5/2 or 7 Day Programming Modes
•4 Comfort Levels per Day
•Optimum Start
•ºC/F Option
•05ºC - 35ºC Range
•Holiday Function
•Hold Function
•Wall Mount or Desk Stand
•Rechargeable Battery (Approx 6 month between charges)
•Mini USB to USB cable provided to allow for recharging from PC
•Frost Protection
•Key Lock Facility
•Dimensions: 109mm x 99mm x 20mm (Height, Width, Depth)
Kit Includes:
1 x PRT-WTS 1 x RC1-WTS

PLEASE NOTE: THIS PRODUCT IS NOT COMPATABLE WITH THE BRASS OR CHROME ENCLOSURES

Price Excl VAT: £90.00 (£108.00 Including VAT at 20%)

Quantity:

Heatmiser PRT/HW-N Low Voltage Programmable Thermostat with Hot Water

The Heatmiser PRT/HW-N is our low voltage 5/2 day programmable thermostat with an additional 5/2 day program for a domestic hot water cylinder. Reduced costs and wiring means the PRT/HW-N really is an all-in-one solution.

The following features are available;
- Large display
- Automatic blue back-light (Turns off after 30 seconds)
- Optimum Start (Energy saving feature)
- °C °F Selectable
- Flush mounting
- Heatmiser TouchPad, PCLink, Netmonitor Compatible
- Time Sync( When used with TouchPad / PCLink)
- 30 minute timing increments
- 5/2 day Heating Program
- 5/2 day Hot water Program
- Up to 4 changes in room temperature
- Key Locking Facility
- Frost protection with adjustable temperature setting.(7-12°C)
- Easily increase or decrease the required temperature
- Remote control optional
- Supply: 12v
- Outputs: Volt free 3A Max

White Finish - Also available in Brass and Silver finish - Please also order relevant enclosure from below if Brass or Silver effect is required.

Price Excl VAT: £41.00 (£49.20 Including VAT at 20%)

Quantity:

Heatmiser PRT-N Programmable Thermostat

The Heatmiser PRT-N is our low voltage 5/2 day programmable room thermostat. The PRT-N is a digital thermostat and programmer in one, providing up to 4 different temperatures at different times of the day.

The following features are available;
- Large display
- Self Learning Optimum Start
- Automatic blue back-light (Turns off after 30 seconds)
- Flush mounting
- °C / °F Selectable
- Heatmiser TouchPad, PCLink, Netmonitor Compatible
- Time Sync (When used with TouchPad / PCLink)
- 30 minute timing increments
- 5/2 day Heating Program
- Up to 4 changes in room temperature
- Key Locking Facility
- Frost protection with adjustable temperature setting.
- Easily increase or decrease the required temperature
- Remote control optional
- Supply: 12v
- Outputs: Volt free 3A Max

White Finish - Also available in Brass and Silver finish - Please also order relevant enclosure from below if Brass or Silver effect is required.

Price Excl VAT: £39.00 (£46.80 Including VAT at 20%)

Quantity:

Heatmiser PRT-E Electric Underfloor Heating Prog Thermostat

The Heatmiser PRT-E underfloor heating thermostat has been designed specifically with electric under floor heating in mind. This combination model has two operating modes which can be selected via software by the installer:

- Mode 0 is designed to work with a remote floor sensor probe, and controls only floor temperature. 4 different comfort levels can be programmed in this mode which can be set according to the occupancy of the building. The floor sensor can be extended up to 20 meters.
- Mode 1 is designed to work with a remote floor sensor and either the built in air sensor or remote air sensor. In this mode, the thermostat will maintain the desired air temperature and will use the floor sensor to prevent the floor from overheating.

05-35°C
Optimum Start
Keylock Facility
Adjustable Frost Setting
Remote Control Option (RM1)
13A Switch rating
Blue Backlight
Floor sensor included
Supply: 230v AC
Dimensions: 98x85x13mm
Weight: 195g
(Please note 13mm depth is after installation)

Mounting: This thermostat is flush mounting, and therefore requires a back box sunk in the wall to accommodate the terminal box for the thermostat. We suggest a back box of 35mm.

Probe Installation: We always suggest installing the probe into a conduit so that it can be retrieved if required. This conduit is not supplied with the thermostat.

White Finish - Also available in Brass and Silver finish - Please also order relevant enclosure from below if Brass or Silver effect is required.

Price Excl VAT: £53.00 (£63.60 Including VAT at 20%)

Quantity:

Heatmiser PRT-EN Underfloor Heating Thermostat

The Heatmiser PRT-EN is our low voltage under-floor heating thermostat. It provides two modes of operation which can be selected in software by the installer. Mode 0 is designed to work with a remote floor sensor and controls only floor temperature. In mode 1, the thermostat will maintain the desired air temperature and will use the floor sensor to prevent the floor from overheating.

This thermostat is flush mounting, and therefore requires a back box sunk in the wall to accommodate the terminal box for the thermostat. We suggest a back box of 35mm.

The following features are available;
- Large display
- Self Learning Optimum Start
- Automatic blue back-light (Turns off after 30 seconds)
- Flush mounting
- °C / °F Selectable
- Heatmiser TouchPad, PCLink, Netmonitor Compatible
- Time Sync (When used with TouchPad / PCLink)
- 30 minute timing increments
- 5 day/2 day Program (Weekday/Weekend programming)
- Up to 4 changes in room temperature
- Key Locking Facility
- Frost protection with adjustable temperature setting.
- Easily increase or decrease the required temperature
- Temperature range 05°C - 70°C Mode 0
- Temperature range 05°C - 35°C Mode 1
- Remote control optional
- Supply: 12v
- Outputs: Volt free 3A Max

White Finish - Also available in Brass and Silver finish - Please also order relevant enclosure from below if Brass or Silver effect is required.

Price Excl VAT: £44.00 (£52.80 Including VAT at 20%)

Quantity:

Heatmiser UH3 8 Zone 230v Wiring Centre

The Heatmiser UH3 is designed to work with the Heatmiser 4 channel 230v time clock (TM4) and 230v Set back thermostat (DS-SB) but equally could be used with any 230v room thermostat.

Up to 8 zones can be controlled from the Heatmiser UH3. On board the Heatmiser UH3 are two heating time channels, each zone allows you to specify which time channel it should follow. 2 additional time channel connections are provided for hot water control or other auxiliary devices. On demand from any zone, a 230v output is provided to switch the relevant zone actuator, underfloor heating pump and valve. A volt free connection is supplied for the boiler, making it compatible with almost all types of boilers.

A simple slide switch makes zone 8 suitable for controlling a radiator zone. When used for controlling radiators, zone 8 does not enable the underfloor heating pump, valve and boiler. Up to 4 actuators can be connected to each zone.

Price Excl VAT: £53.00 (£63.60 Including VAT at 20%)

Quantity:

Heatmiser Netmonitor Internet Remote Control

The Heatmiser Netmonitor allows you to take control of your home heating / hotwater over the internet from any web browser. Plug the Netmonitor into your router and take complete control.

Features:
- Program up to 32 Heatmiser Thermostats (-N type) from any internet browser worldwide
- Connect up to 6 remote temperature sensors to be used for monitoring and alarm purposes
- Program low and high temperature limits
- Connect up to 6 volt free alarms such as your home alarm and receive alarm indications on email.
- Control up to 6 appliances remotely via web browser.

You will need a broadband connection with a fixed IP address and router with port forwarding facility.

Price Excl VAT: £285.00 (£342.00 Including VAT at 20%)

Quantity:

Heatmiser Netmonitor+ Internet and SMS Remote Control

The Heatmiser Netmonitor + allows you to take control of your home heating / hotwater over the internet from any web browser and text message. Plug the Netmonitor into your router and take complete control.

Features:
- Program up to 32 Heatmiser Thermostats (-N type) from any internet browser worldwide
- Connect up to 6 remote temperature sensors to be used for monitoring and alarm purposes
- Program low and high temperature limits
- Connect up to 6 volt free alarms such as your home alarm and receive alarm indications on email and text message.
- Control up to 6 appliances remotely via web browser and text message

You will need a broadband connection with a fixed IP address and router with port forwarding facility.
You will need to purchase a SIM card to use the GSM functions. We suggest you use a Pay as you Go type SIM.

Price Excl VAT: £370.00 (£444.00 Including VAT at 20%)

Quantity: