Reina Ella Towel Radiators

Reina Ella Towel Radiators
The Reina Ella is a flat radiator available in White or Anthracite finish. The Reina Ella has side cut-outs to produce a practical and stylish solution to a standard towel rail. For use with central heating system only.

Height 1200mm
Width 500mm
Pipe Centres 50mm
Wall to pipe centre 35-55mm
Wall to front 68-88mm

Reina Output Btus 70 deg: 3211
Reina Output Watts 70 deg: 942

UK Standard Output Btus 50 deg: 2073
UK Standard Output Watts 50 deg: 608

Supplied with brackets, air and blanking vent.
Made from superior quality mild steel with high quality welding.
5 year manufacturers guarantee.
Manufactured in Europe to EN442 standards.
Delivered usually 1-2 working days

Confused by the difference between the Reina Outputs and the UK Standard Outputs indicated above?

Heat outputs are shown in both Watts and BTUs. All outputs are based on the system’s likely operating temperature and is usually shown as Delta T 50 Degrees which is the current European and UK Rating. Historically, the UK rating was calculated at Delta T 60 Degrees.

We generally display the output calculated at Delta T 50 Degrees. However, Reina calculate and illustrate their outputs based on Delta T 70 Degrees. The result of this is that their outputs appear artificially higher than other manufacturers. This could potentially result in our customers purchasing a radiator that does not achieve the heat output that is required.

As a consequence, we display Reina's output (as featured in their brochure) at Delta T 70 as well as the UK Standard Output calculated at Delta T 50. If you are trying to achieve a certain output, it is most probable that you will need to refer to the UK Standard outputs on the table above but if you are unsure, please check with your installer.
Full Features
Brand Reina
Write Your Own Review
You're reviewing:Reina Ella Towel Radiators
Your Rating