• Checkout IconItems ViewCheckout
White Digital Wall Plate Control for Electric Element

White Digital Wall Plate Control for Electric Element

42.00 (Inc VAT) (Excl VAT 35.00)


Helpline: 01452 543776

Ingress Protection: IPX4
Voltage: 230-245 Volts AC
Maximum power output: 800w
Dimensions: 85 x 85 x 20mm
Approvals: CE, tested to EN55014-1:2006
Warranty: 12 months manufacturers
Full fitting instructions are supplied.

The Thermal Control Unit can be installed as an electric only application as well as a dual fuel installation on a central heating system.

The Power On/Off Button activates the unit. Every press of the upper( + ) Output control button illuminates 1 of the 5 LED lights, increasing the output and the left side ( - ) decreases in the same manner.

1 LED = 40 % power, 2 LEDs = 55% power, 3 LEDs = 70% power, 4 LEDs = 85% power, 5 LEDs = 100% power.

The Eco button switches the unit to a higher power setting for 30 minutes (to heat the towel rail) the power level can be set in the first 30 minutes, then switches to a lower pre-set power for 90 minutes (again this level can be adjusted during this phase). After 2 hours the controller will turn off. Both the 30 and 90 minute setting are saved in the controller.

UK Delivery:
Delivery times vary from the next day to usually within 10 days - dependant on the product. All orders should be completed within 30 days. However, a few special order items may be in excess of 30 days and lead times for these product ranges are quoted on our online catalogue for your information.

For further information click here