SunSpeed is a domestic hot water cylinder designed for use with solar panels. It is a copper cylinder with two heat exchangers, one for solar input and one for a boiler input.
The SunSpeed is an open vented cylinder which makes the location of the cylinder more flexible because the cylinder does not require a safety discharge pipe.
The dedicated solar volumes range from 34% to 49% with the majority exceeding 40% enabling the best use of the solar panels. These dedicated solar volumes allow maximum suitable solar panels surface area from 2.9m2 to 5.0m2. The surface area of the solar heat exchanger coil is designed to exceed Building Regulations requirements.
The boiler coil comes into play in the cooler months of the year as the solar input diminishes. A correctly sized cylinder will ensure enough hot water is available to the householder during these months as the dedicated solar volume will not be heated by the boiler. The boiler coil is sized appropriately to the cylinder and gives a recovery time of less than 26 minutes with sizes to meet all regulations.
2017 ErP compliant
10 year warranty
Low standing heat loss
Delivery times vary from the next day to usually within 10 days - dependant on the product. All orders should be completed within 30 days. However, a few special order items may be in excess of 30 days and lead times for these product ranges are quoted on our online catalogue for your information.
For further information click here