• Checkout IconItems ViewCheckout

Gledhill Boilermate BP Mains Pressure Thermal Store Cylinders

Gledhill Boilermate BP Mains Pressure Thermal Store Cylinders
Diagram Image

Gledhill Boilermate BP Mains Pressure Thermal Store Cylinders

717.60 (Inc VAT) (Excl VAT 598.00)

Quantity:

Helpline: 01452 543776

Gledhill Boilermate BP Thermal Store Cylinders - Mains pressure hot water thermal store for use with gas or oil boilers

The Gledhill BoilerMate BP is an open vented thermal store that provides mains pressure hot water. The Gledhill BoilerMate BP is suitable for use with either a gas or an oil boiler and the heating system can be either open vented or sealed. It is also suitable for upgrading existing traditional hot water systems.

Gledhill BoilerMate BP thermal stores provide:
- Mains pressure hot water giving power shower performance
- Up to 22 litres per minute filling a standard bath in 3-4 minutes
- A dry roof space eliminating the risk of freezing pipes/ tanks in winter
- Increased system efficiency, reducing running costs
- Easy to install BoilerMate BP can be fitted to existing systems, including the existing boiler and controls, where appropriate. Unlike unvented cylinders, BoilerMate BP does not require expensive safety controls or the need to plumb temperature and pressure relief pipework to an outside wall.

The Gledhill BoilerMate BP thermal storage system is supplied with primary water from the boiler which heats the store via a primary coil. Secondary water flows directly from the cold mains into a secondary coil where it is heated by the store before being delivered to the taps.

Gledhill BoilerMate BP thermal stores do not require any annual maintenance. The product fully complies with the HWA (Hot Water Asscoation) specification for thermal stores and is fully 2010 Part L1A (new build and refurbishment) compliant.

Description Height (mm) Width (mm) Depth (mm) Capacity (Litres) Max Flow Rate (Litres per min)
BMBP125 1262 580 595 125 18
BMBP145 1262 580 595 130 18
BMBP185 1423 580 595 153 18
BMBP215 1584 580 595 168 22
BMBP225 1784 580 595 190 22
Notes:

1. The appliance is supplied on a 100mm high installation base and comes complete with a separate top up cistern. This can be installed with or without an overflow/ warning pipe as required.

2. An allowance for the top up cistern and the 100mm installation base are both included in the minimum cupboard dimensions.

3. Where the mains water hardness exceeds 200ppm provision should be made to treat the feed water to reduce the rate of accumulation of lime scale. The optional factory fitted in-line scale inhibitor should be specified at the time of order for hardness levels between 200 and 300 ppm (mg/l). Where the water is very hard ie 300ppm (mg/l) and above the optional polyphosphate type scale inhibitor should be specified at the time of order.

UK Delivery:
Delivery times vary from the next day to usually within 10 days - dependant on the product. All orders should be completed within 30 days. However, a few special order items may be in excess of 30 days and lead times for these product ranges are quoted on our online catalogue for your information.

For further information click here