• Checkout IconItems ViewCheckout

Gledhill Torrent ECO SP Mains Pressure Thermal Store Cylinder

Gledhill Torrent ECO SP Mains Pressure Thermal Store Cylinder
Diagram Image

 Gledhill Torrent ECO SP Mains Pressure Thermal Store Cylinder

990.00 (Inc VAT) (Excl VAT 825.00)


Helpline: 01452 543776

The Gledhill Torrent ECO SP Cylinder utilises inputs from a wood burning or solid fuel boiler as its primary energy source. The Torrent ECO SP only reverts to a conventional boiler when the other heat inputs are insufficient from the alternative energy sources.

The Gledhill The Torrent ECO SP provides high-performance mains pressure hot water via a highly efficient plate heat exchanger. The central heating circuit is normally supplied directly from the boiler although an auxiliary heating circuit can be connected from the store in which case the solid fuel source will provide energy to the auxiliary heating circuit. Obviously, the energy output that can be provided by the auxiliary heating circuit will be limited to the energy input from the solid fuel appliance. This sealed primary (SP) model permits the use of a smaller feed and expansion tank because the main central heating circuit does not need to be catered for. This can make positioning the F&E tank more straightforward.

Provides mains pressure hot water
Benefit for both heating and hot water
No annual maintenance or safety check requirement
No discharge pipework
No risk of legionella
Inherently safe being an open vented cylinder
No G3 qualification requirement for installation

With the new Energy-related Products (ErP) Directive for hot water cylinders in mind, the new Torrent ECO range has not only improved the benefits of the Torrent, but also added some fantastic new features to provide the home owner an immensely energy efficient thermal store:

Energy saving with a high efficiency ErP ready pump.
Flow sensor providing a 75% reduction of hot water response times.
Improved PCB and software.
Higher store temperatures can be utilised, providing greater benefit from solid fuel inputs.
Secondary return functionality (optional kit available if required)

Description Height (mm) Diameter (mm) Volume Max Flow Rate Maximum Dwelling Type
TEC140-SP 1219mm 535mm 140L 35 1 Bath, 1-2 Bed,
TEC170-SP 1449mm 535mm 170L 35 1 Bath, 1 Shower, 2-4 Bed,
TEC210-SP 1414mm 585mm 210L 35 2 Bath, 1 Shower, 3-4 Bed,
TEC250-SP 1654mm 585mm 250L 35 2 Bath, 2 Shower, 3-5 Bed,
TEC350-SP 1874mm 636mm 350L 35 3 Bath, 2 Shower, 3-5 Bed,
Please note the diagram includes optional extra components.
Additional height for a feed and expansion tank will need to be allowed if it is to be sited in the same cupboard.
The feed and expansion tank must be sized to take the water expansion of the whole system (ie. solid fuel boiler, cylinder, open flue boiler and auxiliary heating).
For solid fuel applications, copper feed and expansion tanks are available as an optional extra at the time of order.

UK Delivery:
Delivery times vary from the next day to usually within 10 days - dependant on the product. All orders should be completed within 30 days. However, a few special order items may be in excess of 30 days and lead times for these product ranges are quoted on our online catalogue for your information.

For further information click here