• Checkout IconItems ViewCheckout

Gledhill StainlessLite Plus Indirect Unvented Cylinders

Gledhill StainlessLite Plus Indirect Unvented Cylinders
Diagram Image

Gledhill StainlessLite Plus Indirect Unvented Cylinders

512.40 (Inc VAT) (Excl VAT 427.00)


Helpline: 01452 543776

Gledhill Stainless Lite Plus Indirect Unvented Cylinders.

An unvented cylinder for use with a conventional boiler and electric

Available in 8 sizes ranging from 90 litres to 400 litres, with the largest model capable of satisfying the hot water demands of a property with 3 bathrooms and 3 separate shower rooms.

The indirect range has a high efficiency corrugated tube coil which is connected to a conventional boiler to heat the cylinder of water. The coil’s corrugated design gives much faster recovery times than can be achieved with plain tube coils.

All models have a temperature and pressure relief valve which is factory set at 6 bar and 95 degrees celsius.

(Please note all indirect models come with an on-peak back-up immersion but only the 250, 300 and 400 litre models are supplied with an additional off-peak immersion.)

• Designed for use with gas or oil boilers, either sealed system or open vented
• High efficiency corrugated coil maximises heat transfer to the cylinder of water
• Corrugated coil provides faster reheat times compared to plain coil
• 3kW incoloy immersion heater for emergency back-up
• 90° elbow, flexihose and drain valve supplied as standard

Gledhill Stainless Lite Plus Cylinders carry a transferable 25 year guarantee.

UK Delivery:
Delivery times vary from the next day to usually within 10 days - dependant on the product. All orders should be completed within 30 days. However, a few special order items may be in excess of 30 days and lead times for these product ranges are quoted on our online catalogue for your information.

For further information click here