• Checkout IconItems ViewCheckout

Gledhill Pulsacoil ECO Electric OV Mains Pressure Thermal Store

Gledhill Pulsacoil ECO Electric OV Mains Pressure Thermal Store
Diagram Image

Gledhill Pulsacoil ECO Electric OV Mains Pressure Thermal Store

762.00 (Inc VAT) (Excl VAT 635.00)


Helpline: 01452 543776

Please note the Gledhill Pulsacoil ECO Stainless Steel model replaces the previous Plusacoil BP Copper model

Tthe Gledhill PulsaCoil ECO Stainless is a thermal storage cylinder manufactured from high corrosion resistant stainless steel, providing mains pressure hot water utilising off-peak electric, specifically designed for use in apartments.

The Gledhill PulsaCoil ECO Stainless is an open vented thermal store, which does not require a pressure and temperature relief valve and subsequently does not need any discharge pipe work. It therefore overcomes the requirement of the Part G Building Regulations which prohibits the connection of a discharge pipe from an unvented cylinder into a soil stack.

The domestic hot water is generated via a highly efficient plate heat exchanger. The response time of the delivery of hot water has been reduced by up to 75% with the introduction of the ErP ready pump, new PCB, software and flow sensor. As hot water is demanded, it is mains cold water which is instantaneously heated as it passes through the heat exchanger and delivered to the taps. This method of generating the hot water completely removes the risk of legionella. The innovative design helps make installation and on going maintenance straight forward for the installer.

Other benefits of the Gledhill PulsaCoil ECO Stainless include the fact that the immersion elements are situated in the same primary water at all times and this water is not renewed so no scaling takes place, even in hard water areas. As the cylinder can utilise the off-peak electricity supply it keeps the running costs for the householder down to a minimum.

Pulsacoil ECO Stainless thermal stores do not require any annual maintenance, unlike with an unvented cylinder.

The Gledhill Pulsacoil ECO Stainless thermal store cylinder can be supplied with or without scale inhibitor - please select above.

Description Height (mm) Width (mm) Depth (mm) Volume Max Flow Rate Maximum Dwelling Type
PCS120ECO 1075mm 530mm 595mm 116L 15 1 Bath or 1 Shower, 1 Bed,
PCS150ECO 1145mm 560mm 630mm 147L 15 1 Bath, 1 Shower, 1-3 Bed,
PCS180ECO 1275mm 560mm 630mm 165L 15 1 Bath, 2 Showers, 2-3 Bed,
PCS220ECO 1575mm 560mm 630mm 210L 15 2 Bath, 1 Shower, 2-4 Bed,

1. The appliance is supplied on a 100mm high installation base and comes complete with a separate top up cistern. This can be installed with or without an overflow/warning pipe as required.

2. An allowance for the top up cistern and the 100mm installation base are both included in the minimum cupboard dimensions.

3. Where the mains water hardness exceeds 200ppm provision should be made to treat the feed water to reduce the rate of accumulation of lime scale. The optional factory fitted in-line scale inhibitor should be specified at the time of order for hardness levels between 200 and 300ppm (mg/l). Where the water is very hard ie 300ppm (mg/l) and above the optional polyphosphate type scale inhibitor should be specified at the time of order.

4. To maximise the use of cheaper rate off-peak electric, it is recommended that a larger cylinder is fitted when only a standard 7 hour off-peak tariff is available. With a 10 hour tariff, a smaller cylinder can be used as it is heated up by off-peak electric more frequently.

UK Delivery:
Delivery times vary from the next day to usually within 10 days - dependant on the product. All orders should be completed within 30 days. However, a few special order items may be in excess of 30 days and lead times for these product ranges are quoted on our online catalogue for your information.

For further information click here