Abacus Bluetooth Element for Electric Only Installation Option

Optional Electric Only installation for an Abacus Rail using a bluetooth element. This product when purchased with the required Abacus Rail will upgrade the rail from a hydronic unit to a factory filled and sealed electric only unit with bluetooth control.

Available in White and Chrome finish.

Available in outputs of 150W and 300W - please refer to your towel rail to see which output is required or call us if unsure.

For Electric only heating elements the Towel Warmer of your choice is filled with a special heating solution and the Electric Heating Element is then factory fitted and sealed. The wattage of the element is matched according to the size of the towel warmer.

Disclaimer:

When an electrical element is used to heat a towel warmer or radiator you will not get identical performance as you would connected to a central heating system as there is no circulation of liquid and it will therefore take longer to heat up and will be noticeably hotter near the element. After 1 to 2 hours of continuous use the heat would have spread but there will still be temperature variances across the surface. This is not a fault.

• Bluetooth connectivity
• Next generation low energy controller
• 24/7 programming via dedicated app (Android and iOS)
• Compact design - 78 x 75 x 50mm (H x W x D)
• Finish: Chrome / Black or White
• Manual override boost mode
• Energy consumption via app
• Electric only (not connected to your wet central heating system)
• IPx4 Rated (suitable for installation into IEE Zone 1, 2 or 3)
• Thermal cut out should the element become too hot
• 150w or 300w options